Self-Levelling · Supply & install
Self-Levelling Melbourne
Self-levelling compound that corrects uneven slabs so vinyl and carpet tiles go down flat and stay that way.
At a glance
Self-Levelling
Self-levelling is a preparation step: compounds used to smooth and level a subfloor before vinyl or carpet goes down. Depth and product follow what we find on site. We do not publish a millimetre claim without a measure.
- Used when the subfloor will not take a flat finish as it is
- Quoted separately from the floor covering
- Follows the product’s own requirements — we do not invent them
- Shown as its own line on the quote
Why self-levelling
The benefits
01
Flat finish
Corrects dips and unevenness across an area.
02
Smooth surface
Vinyl shows what's underneath, so smooth matters.
03
Better performance
Reduces joint stress on click floors and bond issues on glue-down.
04
Planned drying
Drying time built into the program up front.
Who it's for
Built for these projects
Anyone installing vinyl or carpet on a slab or substrate that is out of level.
Older slabs
Uneven or patched concrete.
Renovations
Floors after tiles or old coverings are lifted.
Commercial fit-outs
Slabs that don't meet the product tolerance.
Extensions
Joining old and new floor levels.
Options
Levelling options
The right approach depends on how uneven the floor is.
| Condition | Approach |
|---|---|
| Small local dips | Patching compound |
| Widespread unevenness | Self-levelling across the area |
| High spots | Grind first |
| Timber subfloor | Overlay or a timber-suitable system |
General guidance. We confirm the right product on site.
How it works
From measure to handover
01
Measure and assess
We measure on site, check the subfloor and confirm how the space is used.
02
Written quote
Product, preparation, removal and trims itemised, with assumptions and exclusions listed.
03
Prime and pour
Surface cleaned, primed and levelled.
04
Dry and install
Drying time observed, then flooring laid.
Guides
Self-Levelling guides
Service areas
Self-Levelling near you
Supplied and installed from Coolarooacross Melbourne's north and metro.
FAQs
Self-Levelling questions
Do you name a thickness before you measure?
No. Thickness follows the measure. A quote that invents a depth before we see the floor is not how we work.
How long before flooring can go on?
It depends on the compound, thickness and conditions. We'll confirm the drying time in the program.
Will levelling raise the floor?
It can add a little height. We check doors and transitions first.
Free on-sitemeasure & quote
Free measure & quote
Ready to transform your space?
Book a free on-site measure and quote. Homes and commercial sites, from our Coolaroo base.
- On-site measure
- Clear written quote
- No obligation
- 1Tell us the space and timing
- 2Free on-site measure and quote
- 3Supply and install when booked
We measure before we specify — homes and commercial sites.