Safety Vinyl · Supply & install
Safety Vinyl Melbourne
Slip-resistant safety vinyl for wet and spill-prone areas, matched to your specification and installed with coving where needed.
At a glance
Safety Vinyl
Safety vinyl is a type we supply and install when the brief calls for a floor that is specified for wet or higher-risk underfoot conditions. We match the product to the document or the site — we do not publish a slip number we have not been given.
- Discussed for wet rooms, entries and workplaces
- A separate type from decorative plank
- Installed only after the substrate is assessed
- Brand chosen from the ranges we supply and install
Why safety vinyl
The benefits
01
Grip where it matters
Slip-resistant surfaces for kitchens, bathrooms, ramps and entries.
02
Specification-matched
Products selected to the slip classification your project requires.
03
Sealed details
Welded seams and cove skirting where the space needs them.
04
Maintenance guidance
Cleaning advice to help keep slip performance over time.
Who it's for
Built for these projects
Commercial sites, childcare, healthcare and other rooms where the specification names a safety floor.
Commercial kitchens
Grease and water exposure.
Aged care and health
Ensuites, bathrooms and wet areas.
Schools and childcare
Toilets, art rooms and kitchens.
Workplaces
Amenities, change rooms and wash-down areas.
Options
Where safety vinyl is usually discussed
The requirement for your project comes from the specification, designer or building owner.
| Area | Risk | Typical approach |
|---|---|---|
| Commercial kitchens | Grease and water | Specialist safety vinyl |
| Bathrooms and ensuites | Water | Wet-area safety vinyl with coving |
| Ramps and entries | Water, grit, gradient | Higher-grip product plus matting |
| Staff rooms | Occasional spills | Safety or commercial vinyl |
General guidance. We confirm the right product on site.
How it works
From measure to handover
01
Measure and assess
We measure on site, check the subfloor and confirm how the space is used.
02
Written quote
Product, preparation, removal and trims itemised, with assumptions and exclusions listed.
03
Install
Safety vinyl laid, seams welded and coving formed where specified.
04
Handover
Cleaning guide provided to keep slip performance.
Guides
Safety Vinyl guides
Service areas
Safety Vinyl near you
Supplied and installed from Coolarooacross Melbourne's north and metro.
FAQs
Safety Vinyl questions
Do you publish a slip rating?
No. If the project specification names a rating, we quote a product against that document. We do not invent one.
How do I know which slip rating I need?
It's normally set by your designer, specifier, building surveyor or the building owner. Send us the requirement and we'll match it.
Can safety vinyl look good?
Yes. Ranges come in many colours and some designs, though the textured surface looks different from standard vinyl.
Free on-sitemeasure & quote
Free measure & quote
Ready to transform your space?
Book a free on-site measure and quote. Homes and commercial sites, from our Coolaroo base.
- On-site measure
- Clear written quote
- No obligation
- 1Tell us the space and timing
- 2Free on-site measure and quote
- 3Supply and install when booked
We measure before we specify — homes and commercial sites.